Sub-floor Preparation

Prio to installation of Conductive / Dissipative / ESD Tile, it is important to ensure concrete subfloor is clean, flat and dry with moisture level of less than 5% measured by Tramex concrete moisture meter.

Self Levelling

Applying cementitious Self Levelling compound is a good way of rectifying un-even subfloor prio to Conductive / Dissipative / ESD Tile installation. Usually applied in thickeness of 2 ~ 3mm, the cementitious self levelling compound application process consists of the following steps :

1.) Throughly mixed self leveling compounds with clean wafer

2.) Pour the self levelling compounds onto sub-floor

3.) Spread the self levelling compounds evenly on sub-floor  

4.) Use the spike roller to release trapped air within self levelling compounds

Video Of Self Levelling Application :